0 Items - $0.00 My account / Register

Draft Beer Equipment

Home / Homebrewing / Draft Beer Equipment

Tank Empty Beer Gas (75% Nitrogen) or 100% Nitrogen - 20 CuFt

Tank Empty Beer Gas (75% Nitrogen) or 100% Nitrogen - 20 CuFt

$132.36

Sanke Tap American Type D

Designed to fit American style commercial kegs, the Sanke Head is shipped complete with 5/16” gas tail piece but minus the beer dispensing tail piece, neoprene washer and hex or wing nut.The American Sanke Keg Coupler is the most commonly utilized s

Sanke Tap American Type D

$55.00

Tank Plug Liquid - John Wood

Plug fits John Wood Model 85 Ball Lock Kegs and Firestone Challenger kegs. Assembly includes poppet, plastic insert and o-ring.Application Tip:Solving troublesome leaks may require measures beyond replacing a poppet or an o-ring. Occasionally, plugs

Tank Plug Liquid - John Wood

$24.99

Tubing BEVLEX #200 Beverage 1/4" ID - CLEAR 100 ft Roll

Bevlex® Series 200
Special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer for excellent kink resistance and taste protection properties.

Tubing BEVLEX #200 Beverage 1/4" ID - CLEAR 100 ft Roll

$88.00

Faucet Lever Stainless Steel

The Stainless Steel Lever fits into the top opening of a standard Chrome Faucet body and opens and closes the faucet during dispensing. Manufactured with inert stainless steel, the Faucet Lever provides a sanitary contact point in faucets installed into

Faucet Lever Stainless Steel

$6.25

Regulator - Nitrogen

Similar in function to CO2 Regulators, the Nitrogen Regulator controls the dispensing of beer gas or straight nitrogen, providing the classic “nitro” cascade from carbonation created by beer gas. By installing a Stout Faucet home brewers can f

Regulator - Nitrogen

$149.99

Portable CO2 Charger Cornelius Keg

Portable CO2 Charger Cornelius Keg

Portable CO2 Charger Cornelius Keg

$27.99

Pin Lock Socket

The Pin Lock Socket is the proper tool for removing gas or liquid tank plugs from pin lock kegs. Manufactured with four strategically placed notches for latching onto 2 pin or 3 pin tank plugs, the socket fits standard 1/2Ã¢â‚¬Â socket drivers and remove

Pin Lock Socket

$21.50

Tank Empty CO2 - 5 Lb

Brew and Grow ships our 5 lb. aluminum CO2 tanks empty per federal law. We recommend checking local listings for industrial gas suppliers as providers for not only CO2 but also beer mix. (76% Nitrogen and 24% CO2) Filled 5 lb. tanks can efficiently carbon

Tank Empty CO2 - 5 Lb

$99.99

Tailpiece Stainless Steel 3/8'' Barb (Fits 5/16" Tubing)

Stainless Steel Tail Piece

Tailpiece Stainless Steel 3/8'' Barb (Fits 5/16" Tubing)

$6.49

Tubing Silicone High Temp 1/2'' ID - Per Foot

High Temp tubing is ideal for the transfer of hot water and wort during brewing processes, especially from boiling vessel to wort chiller.

Tubing Silicone High Temp 1/2'' ID - Per Foot

$5.49

Faucet Collar - Chrome

The Chrome Collar is the correct replacement part for worn collars on standard Chrome Faucets.Designed to hold the faucet lever assembly secure in the faucet and prevent troublesome leaks, the Chrome Collar is easily installed on existing faucets.  S

Faucet Collar - Chrome

$3.25

Relief Valve (For Ball Lock Keg)

Replaces threaded, screw-in type valves on the lids used in ball lock kegs. Typically, worn out manual relief valves refuse to reseat properly and will continue to leak CO2 once seemingly reseated. Even slight movement of kegs can loosen the seal of old v

Relief Valve (For Ball Lock Keg)

$10.99

Poppet - John Wood Ball Keg

Poppet valve fits into gas and liquid tank plugs of John Wood model 85 ball lock kegs. Application Tip:Worn poppets leak and should be replaced once the poppet cannot be properly reseated. Many different manufacturers have produced soda kegs and mult

Poppet - John Wood Ball Keg

$5.99

Dip Tube Liquid - 5 Gal Ball Lock Keg

Constructed of stainless steel, the Beverage Dip Tube is manufactured with a curve near the mid-point of the tube, conforming to Ball Lock Keg design. To complete installation, the Beverage Dip Tube requires a Dip Tube O-Ring to prevent foaming and facili

Dip Tube Liquid - 5 Gal Ball Lock Keg

$13.99

Poppet - Cornelius Ball Keg

Designed to fit both ball and pin-lock kegs manufactured by Cornelius, the poppet can be correctly installed inside the tank plugs of Spartan and Super Champion soda kegs, forming a tight, leak free seal.Application Tip:Worn poppets leak and should be rep

Poppet - Cornelius Ball Keg

$8.49

O-Ring Pin Lock Plug (Green Or Red)

Replacement o-ring fits the groove at the top of both gas and beverage plugs attached to pin lock kegs.Brew and Grow recommends replacing o-rings when leaks occur with pin lock disconnects attached to either gas or beverage plugs. Gas or Beverage Lea

O-Ring Pin Lock Plug (Green Or Red)

$0.40

Clamp Crimper

Provides proper crimping of Oetiker clamps to beverage and gas tubing, creating liquid or gas tight seals.Oetiker clamps are often utilized for permanent installations.Crimper attaches clamps to and removes clamps from tubing in beverage installations.

$10.99

Keg 5 Gal Ball Lock - New

Constructed of 304 grade stainless steel and NSF approved, the A.E.B. Ball Lock Keg is easily cleaned and sanitized and fully compatible with Cornelius replacement parts.Measurements: 8 ½” Diameter x 25” Ht.Keg Features:
<ul>
<li>&ldquo

Keg 5 Gal Ball Lock - New

$199.99

Washer - Plastic CO2

Following CO2 tank refills, gas and welding supply houses usually provide fiber washers for placement between the tank and regulator connections. Our hardened nylon washer outperforms fiber or composite washers, preventing frustrating leaks and quickly de

Washer - Plastic CO2

$0.99

Tap Handle Insert

Custom created Tap Handles add a stylish, personalized touch to Keggerators, Jockey Boxes or Tap Towers. The Tap Handle Insert is the connection point between the tap handle and the faucet. Manufactured with the correct thread size for fitting standard fa

Tap Handle Insert

$1.99

Tubing BEVLEX #200 Gas Hose 5/16" ID - RED Per Foot

Special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer for excellent kink resistance and taste protection properties.

Tubing BEVLEX #200 Gas Hose 5/16" ID - RED Per Foot

$1.89

Offset CO² Wrench

Metal CO2 wrench (offset)

The tip size we stock is absolutely perfect for all of the snap rings for Luxfer, Catalina and Kidde.

Offset CO² Wrench

$6.00

Tubing Clear Beverage 3/16" - Per Foot

Sold per foot, 3/16â€ beverage tubing is FDA food grade and will not impart odors or flavors and provides reliable and durable delivery of beverages in keggerator systems.

Tubing Clear Beverage 3/16" - Per Foot

$1.20