Hardware and Fittings

This insert blocks the high flow side perforations on the 10.5 gal Foundry to improve efficiency for small grain bills. By blocking the high flow side perforations on the basket, recirculating wort is directed through the bottom of the basket. Perfect for

Providing a high quality seal, the flat, Weldless O-Rings were designed for placement in Brew and Grows standard ½" NPT Weldless fittings such as bulkheads and disconnects. The Flat O-Ring provides greater contact area with metal surfaces, preventing leak

Designed to close off unused pipe fittings, our stainless steel plug threads into ½" NPT female openings, allowing brewers to fill in unused kettle ports or dead end a length of pipe and block liquid flow.

High Temp tubing is ideal for the transfer of hot water and wort during brewing processes, especially from boiling vessel to wort chiller.

Yeast Harvesting Kit - Crucible

High Temp tubing is ideal for the transfer of hot water and wort during brewing processes, especially from boiling vessel to wort chiller.

STAINLESS STEEL 3/8" BARBED

STAINLESS STEEL 1/2" BARBED

The Blichmann Quick Connector (QD) with 3/8" barb allows for the swift connection and disconnecting of 3/8" Silicone Heat Tubing to and from wort chillers or any type of brewing equipment manufactured with ½" Male Pipe Thread.

The Blichmann Quick Connector (QD) with 1/2" barb allows for the swift connection and disconnecting of 1/2" or 3/8" Silicone Heat Tubing to and from wort chillers or any type of brewing equipment manufactured with ½” Male Pipe Thread.The ½” QD is attached

For connecting brewing hardware manufactured with ½”NPT, the Full Coupler provides a crucial, female to female “jumper".

Used to create kettle conversion kits and weldless fittings and also to attach items to couplers.

Bulkhead Silicone O-Ring Red Individual

Quick Connect O-Ring - Grip Style

With 1/2" female pipe thread inside the bolt head, the Stainless Steel Weldless Bulkhead features 1/2" threads running the length of the bolt.   When properly installed, the two included O-rings are seated, internally and externally, between the provided

Used to create kettle conversion kits and weldless fittings and also to attach items to couplers.

For repairing damaged female garden hose connectors, the ½” barb fits the inner diameter of a standard garden hose. The ¾” Female Garden Hose Thread fits the male connectors attached to plate, counter flow and immersion type chillers.

Constructed of 304 stainless steel, the Washer fits the Bulkhead Connectors utilized in Kettle and Cooler Conversion Kits.

Stainless Steel Flat Nut for Kettle Conversion is utilized in kettle conversion kits. Placed on the portion of the conversion kit located outside the kettle, the Flat Nut fits between the Silicone Washer(o-ring) and the ball valve.

For threading to ½" FPT connections, the Stainless Steel 3/8" Barb allows for easy connection of Silicone heat tubing to wort outlets or inlets on ball valves, full couplers and pipe fittings.

For threading to ½” FPT connections, the Stainless Steel ½” Barb allows for easy attachment of Silicone heat tubing to wort outlets or inlets on Ball Valves, Full Couplers and pipe fittings.Application Tip: 3/8” Silicone tubing will stretch and fit the ½”