Watering and Irrigation

Woodpecker irrigation line per foot

The Grow1 Inline Garden Water Filter features an inline, high-flow rate design utilizing NSF certified Natural Coconut Shell Activated Carbon to eliminate chlorine and sediment contamination, odors, and bad taste from drinking water. A flexible hose prote

Above is a commonly used setup. Coming off the filter with 1/2" line (either soft or irrigation line), you would go to a 1/2" T. From there on, we recommend using 1/2" irrigation line because the soft line, while very flexible, is not compatible with inse

Use our 3/4" fittings to design and build your custom irrigation system.

Use our 1/4" fittings to design and build your custom irrigation system.

Use our 1/2" fittings to design and build your custom irrigation system.

The Angle Barbed Stake has a unique flow channel down the length of the stake directing the water into the container. It also has a pointed end for easy container insertion. For use with Super Flex UV Whiteâ„¢ PE Tubing.

A simple shut-off valve with 3/4" barbed fittings. Easily attaches to our Irrigation line. Split your line and use two shut-off valves to easily drain your reservoir by turning off the feed line and opening the drain line.

A simple shut-off valve with 1/2" barbed fittings. Easily attaches to our 1/2" Irrigation line. Split your line and use two shut-off valves to easily drain your reservoir by turning off the feed line and opening the drain line. Also available in 3/4".

Use our 3/4" fittings to design and build your custom irrigation system.

Use these high quality barbed 3/16 in connectors for your irrigation systems or hydroponic systems. Feature 3 barbs for a tight fit. Bump stop assures fittings are completely and securely inserted in tubing. Made with 100% virgin plastic.

The 1/2" female pipe thread splits to accept 2 - 1/2" irrigation lines. Simply push the 1/2" irrigation line into the water-tight slip fittings. The Swivel T can be used with the Israeli Filter.

Simply poke a small hole, using a thumb tack, or needle, where you would like to place the dripper. Open the hole to the correct size by using a hole punch tool. Insert the drip head into the line (colored side in). Attach a length of Woodpecker drip line