Brewing Equipment

Home / Homebrewing / Brewing Equipment
Brewer's Best Element Burner - 70-80K BTU
Capable of bringing ten gallons of water (at 50F) to a boil in less than one hour, the Element Burner is highly efficient and than one hour, the Element Burner is highly efficient and works great with any size pot or kettle
Add to cart
Brewer's Best Element Burner - 70-80K BTU
$179.98
Fermentor w/ Lid - 10 Gal
The 10 - Gallon fermenter is typically utilized for larger batch fermentations and is ideal for macerating musts produced from red wine grapes. Easily removed lid allows for quick and simple cap management operations. Lid is not airtight, allowing CO2 gas
Add to cart
Fermentor w/ Lid - 10 Gal
$53.00
Oxygenation Stone - 2 Micron 1/4" Barb
Oxygenating chilled wort greatly reduces lag times between yeast pitching and onset of fermentation.
Add to cart
Oxygenation Stone - 2 Micron 1/4" Barb
$14.44
Wort Chiller 25' Copper immersion
Swiftly chilling wort from boiling to yeast pitching temperature greatly reduces the opportunity for bacteria to gain a foothold in your beer. While lessening bacterial infections, quickly cooling wort improves beer clarity by creating the proper conditio
Add to cart
Wort Chiller 25' Copper immersion
$98.98
Siphon Tube Holder
Siphon Tube Holder slides into mouth of carboys, keeping racking cane in place for hands free operation during siphoning.
Add to cart
Siphon Tube Holder
$2.58
Brush - 38'' Tank
TANK BRUSH 38"
Add to cart
Brush - 38'' Tank
$15.99
Erlenmeyer Flask - 1000 mL
The 1000 ml borosilicate glass flask provides the appropriate size for small yeast starters, especially for lower gravity batch sizes. Place either a 35-45mm foam stopper or a #8 rubber stopper and an airlock to seal the opening from bacteria or wild yeas
Add to cart
Erlenmeyer Flask - 1000 mL
$17.98
Racking Tube Replacement Tip 3/8"
This is the black removable tips for a 3/8" racking tube.
Add to cart
Racking Tube Replacement Tip 3/8"
$0.69
pH Test Strips - Beermaking Range
The pH Test Strips measure the pH of the mash at room temperature and measure the narrow range of 4.6 – 6.2. As the ideal pH range of the mash is between 5.2 – 5.6 pH, the tight scale allows for a more accurate reading. 100 strips per vial.
Add to cart
pH Test Strips - Beermaking Range
$11.99
PBW 4 lb
Use 2 oz per 5 gallons warm water, soak for 30 minutes and rinse with warm water. The only patented non-caustic cleaner designed to clean stainless steel and safe for use on glass, copper, plastic, brass and ceramic equipment. Environmentally friendly a
Add to cart
PBW 4 lb
$46.49
Carboy Wedge
During siphoning operations, place 2 wedges beneath the carboy, creating an optimum angle to rack the beverage from the fermentor while leaving behind yeast and trub/lees.
Add to cart
Carboy Wedge
$2.78
Carboy Glass - 5 Gal
The 5 Gallon Glass Carboy can be used as a primary or secondary fermentor. The Glass Carboy is an effective addition to bucket systems, especially for beverages requiring prolonged conditioning periods, including lagers, high gravity ales, ciders and mead
Add to cart
Carboy Glass - 5 Gal
$73.98
Bucket Fermenting - 2 Gal
The 2 Gallon Plastic Fermenting Bucket acts as a primary fermentor of 1 gallon batches of beer, mead, cider or fruit wine. We recommend siphoning to 1 gallon jugs for secondary fermentation and conditioning.
Add to cart
Bucket Fermenting - 2 Gal
$8.99
Caps - 38mm Metal Screw For Gal Jug (72/Bag)
Metal Screw Caps fit ½ and 1 gallon glass jugs. Caps can be utilized for sealing growlers filled with beer taken straight from the tap.
Add to cart
Caps - 38mm Metal Screw For Gal Jug (72/Bag)
$33.98
Capper - Red Baron
The Red Baron's highly durable design allows brewers to bottle batch after batch. Includes a magnet for maintaining placement of bottle cap and features spring loaded arms for easy crimping. To bottle with European or Belgian Champagne style beer bottles,
Add to cart
Capper - Red Baron
$23.99
Brush - 1/4" x 36" Down Tube
The Down Tube Brush cleans soda keg beverage dip tubes and 3/8" transfer tubing and measures a full 36" long. Constructed of braided wire and nylon bristles.
Add to cart
Brush - 1/4" x 36" Down Tube
$5.98
Auto-Siphon Clamp for 3/8" or 5/16"
Clamp attaches to lip of carboy or bucket fermentors, holding auto-siphon in place for hands free operation.
Add to cart
Auto-Siphon Clamp for 3/8" or 5/16"
$4.60
Funnel - 8'' w/Fine Filter Screen
For home brewers boiling wort in kettles without a spigot, a funnel is a great tool for transferring freshly chilled wort to glass carboys of all sizes. Simply place the spout of the funnel in the opening of the carboy and pour, filling the carboy quickly
Add to cart
Funnel - 8'' w/Fine Filter Screen
$7.99
Funnel - 10'' W/Fine Filter Screen
For home brewers boiling wort in kettles without a spigot, the 10” funnel is a great tool for transferring freshly chilled wort to Better Bottles of all sizes. Simply place the spout of the funnel in the opening of the Better Bottle and pour, filling the
Add to cart
Funnel - 10'' W/Fine Filter Screen
$9.99
28mm CLOSURE FOR P.E.T. BOTTLE (BAG OF 24)
For capping 500 ml bottles, the 28mm closure easily attaches by simply screwing the cap to the bottle opening. Manufactured with a tamper evident ring, the screw on caps provide the proper air tight seal, maintaining carbonation levels in the beverage con
Add to cart
28mm CLOSURE FOR P.E.T. BOTTLE (BAG OF 24)
$5.98
Stainless Steel 3/8" Barb X 1/2" MPT
For threading to ½" FPT connections, the Stainless Steel 3/8" Barb allows for easy connection of Silicone heat tubing to wort outlets or inlets on ball valves, full couplers and pipe fittings.
Add to cart
Stainless Steel 3/8" Barb X 1/2" MPT
$6.99
Wax Beads - Black
Bottle wax adds an elegant finishing touch on wine, mead, cider or beer bottles.
Add to cart
Wax Beads - Black
$17.98
Tubing Silicone High Temp 1/2'' ID - Per Foot
High Temp tubing is ideal for the transfer of hot water and wort during brewing processes, especially from boiling vessel to wort chiller.
Add to cart
Tubing Silicone High Temp 1/2'' ID - Per Foot
$6.49
Offset CO² Wrench
Metal CO2 wrench (offset)


The tip size we stock is absolutely perfect for all of the snap rings for Luxfer, Catalina and Kidde.
Add to cart
Offset CO² Wrench
$6.00