Wort Chiller 25' Stainless Steel immersion
|Availability:||Out of stock|
Constructed with 25' of coiled 3/8" OD tubing, the Stainless Steel Immersion Wort Chiller has (2) 6' sections of 3/8" clear vinyl tubing attached to either end of the chiller. On the inlet side, the vinyl tubing has a ¾” heavy-duty female swivel garden hose disconnect. The female disconnect and (2) vinyl hoses are all attached to the chiller via stainless steel hose clamps.
- (2) 6' lengths of clear vinyl tubing
- (3) strong stainless steel hose clamps
- (1) 3/4" heavy duty female swivel garden hose fitting
Made in the USA
- 9.75" coil diameter
- 4" coil height
- 13.5" inlet/outlet height
Designed to chill 5 – gallons in as little as 10 minutes, the rugged Stainless Steel Chiller cools wort quickly and effectively through the process of heat exchange. To begin chilling, attach the female swivel to a garden hose faucet or adapter connected to a standard kitchen faucet. Submerge the chiller in hot wort and run cold water through the stainless coil. The cold water easily absorbs the heat from the wort while the warm water exits the chiller and into a drain or bucket, saved for later utilization in cleaning operations.
For best results, clean and sanitize and test connections of the chiller prior to cooling wort.