per page
Items 1 to 30 of 45 total
1 2

Hardware & Fittings

$7.95 - $12.95
$7.95 - $12.95
With 4 different configurations available, Brew and Grow offers 1/2" Quick Connects to fit a wide variety of brewing situations. Whether an application requires a 3/8" or 1/2" barb, our Quick Connects provide the option of output barbs formed with a 90 degree turn or a standard straight version.
Stainless Steel Flat Nut for Kettle Conversion is utilized in kettle conversion kits.
$3.50 - $3.99
$3.50 - $3.99
The 1”, 1 ½” or 2” long Stainless Steel Nipples provide practical solutions for interconnecting various 1/2" FPT pipe fittings.
$9.99 - $9.99
The Stainless Steel Male QD with Barb mates with a female QD attached to brewing vessels or brewing equipment such as the wort inlet and outlets of a plate chiller.
$15.99 - $15.99
The 3/8" x 1/2" compression fitting creates a quick and easy conversion of a keg into a keggle by connecting our 11 ½” Sanke False bottom to the 1/2" female NPT coupler on our Kettle Conversion Kit
Stainless steel plug threads into ½” NPT female openings.
3/4" FPT to 1-1/2" Tri-Clover Fitting designed to fit equipment with 3/4"MPT.
Stainless Steel Female Quick Disconnect can be threaded onto ½” male fittings and paired with our Stainless Steel Male Quick Disconnect with ½” barb.
The QD easily threads into wort outlets on Ball Valves, Full Couplers and pipe fittings or any section of brewing equipment with ½” Female Pipe Fittings.
1.5" Tri Clover EPDM Gaskets are designed with a wide-ranging temperature tolerance.
The Stainless Steel Coupler provides the necessary versatility for interconnecting different sized pipe fittings in brewing systems requiring reduction or expansion of the hard piping.
45° Stainless Steel Elbows provide the necessary versatility to maintain flow in RIMS or HERMS systems, allowing water and wort to re-circulate during mashing, lautering and cleaning operations.
Providing a high quality seal, the flat, Weldless O-Rings were designed for placement in Brew and Grows standard ½” NPT Weldless fittings such as bulkheads and disconnects. The Flat O-Ring provides greater contact area with metal surfaces, preventing leaks at vital contact points and creating a smoother brewing session.
For attaching ball valves, thermometers, etc to kettles with a 7/8" hole, the Weldless Bulkhead fitting proves easier to tighten with wrench(es) than standard bulkhead fittings. The extended bolt length allows for easy attachment of fittings such as ball valves or couplers.
The Stainless Steel Male QD with ½” FPT threads onto any ½” MPT fitting. Providing numerous options for interconnecting brewing system equipment, the Male QD optimizes functionality in brewing operations, saving time and effort during crucial steps of wort production.
Designed to fit the ¾” center inlet on the "Center Inlet Stainless Steel Replacement Head" for Chugger or March pumps, the Stainless Barb should be installed with Teflon tape applied to the threads of the inlet prior to attaching the barb.
1.5" TC Silicon Gasket is rated for -45F - 446F (-43C - 230C)
Constructed of 304 – stainless steel, the Washer fits the Bulkhead Connectors utilized in Kettle and Cooler Conversion Kits.
Quick Connector O-Rings create liquid tight seals between Quick Connectors and 1/2" MPT pipe fittings.
Bulkhead O-rings for Cooler Conversion Kits replace worn or lost gaskets and are manufactured with temperature tolerance spanning -75 - 375F (-59 - 191C).
$4.99 - $4.99
The Female connector easily threads to Sill Cocks or other Garden hose type connections while the Male Disconnect threads to the Female Garden Hose connector attached to garden hoses.
The Stainless Steel 1.5” Tri-Clover Elbow provides versatility in brewing installations, offering a 90 degree turn to promote a compact footprint and efficient and smooth flow of liquids during mashing, lautering and cleaning operations.
The 1.5” Tri-Clover Cap was designed to seal unused Tri-Clover fittings or ports.
The Stainless Steel 1.5” X ½” FPT easily threads to ½” NPT connections such as Chugger Pumps, Plate or Counter flow Chillers or any brewing equipment with ½” male threads.
Our 3 – Piece Stainless Steel Ball Valve is manufactured with high quality, 316 stainless steel and features a quarter turn valve with a locking mechanism.
The Stainless Steel Ball Valve is manufactured with high quality stainless steel and features a quarter turn valve with a locking mechanism.
the Stainless Steel ½” Barb allows for easy connection of Silicone heat tubing to wort outlets or inlets on Ball Valves, Full Couplers and pipe fittings.
For repairing damaged male garden hose connectors, the ½” barb fits the inner diameter of a standard garden hose.
The ¾” Female Garden Hose Thread fits the male connectors attached to plate, counter flow and immersion type chillers.
The 3/4" Male Garden Hose x Female Plug threads into female garden hose connections and mate to Polysulfone QD's with male fittings.
per page
Items 1 to 30 of 45 total
1 2