Ball Valve 1/4 MPT X 1/4 MFL (w/Check Valve)

The Ball Valve allows home brewers to create an economical gas splitter while utilizing the Wye - 1/4" MPT x 1/4" FPT x 1/4" FPT splitter.
$12.50

Details

For threading to ¼” FPT connections, the Ball Valve allows home brewers to create an economical gas splitter while utilizing the Wye - 1/4" MPT x 1/4" FPT x 1/4" FPT splitter.

(2) Ball Valve ¼ ” MPT X ¼” MFL (w/Check Valve) will be required to complete the assembly. 

Beyond the splitter system outlined above in the Application Tip section below, the Ball Valve can be utilized as a replacement for gas outlet barbs on Double Gauge or Secondary Regulators installed in draft systems.

Application Tip:

To install the Wye Splitter, simply thread two Ball Valve ¼ ” MPT X ¼” MFL (w/Check Valve) into the two ¼” female openings of the Wye.  Remove the gas outlet barb from the Regulator and thread the ¼” MPT end of the Wye into the opening formerly holding the gas outlet barb.

To complete the Wye splitter system, thread a gas nut and stem assembly to each ¼” MFL of the Ball Valves.  Attach a length of gas tubing between a gas disconnect and each stem, clamping the components together.

Now two kegs can be fed CO2 from a single CO2 tank.

To create an airtight seal, Brew and Grow recommends wrapping the male threads of the Wye and the Check Valves with Teflon tape. 

Additional Information

SKU 80146
Manufacturer No